Satek Yellow Spin Casting Rubber

Spin Casting Rubber for Zamak (Zinc Alloy)

spin casting rubber

Yellow Spin Casting Rubber

Spin casting, also known as centrifugal rubber mold casting (CRMC), is a method of utilizing centrifugal force to produce castings from a rubber mold.

Satek rubber mold centrifugal Spin-Casting System provides high levels of strength, close tolerances and excellent reproduction of detail.

Centrifugal Spin-casting provides an economical solution for product development requirements, as well as short to medium production runs

Produce highly detailed decorative, novelty objects and hardware items with high quality and finish

It produces high-quality parts in commercial grade: zinc alloys , tin alloys and lead alloys.

Yellow Spin Casting Rubber

The required vulcanization time prolongs with increasing thickness of the rubber layer.

The factors that affect the shrinkage rate of the rubber compound: the higher the curing temperature, the greater the shrinkage rate. In general, the temperature of each increase of 10 degrees C, the shrinkage rate increased by 0.2% ~ 0.5%

Technical Specification

wdt_ID Type Yellow Spin Casting
1 Hardness 71 Shore
2 Vulcanization Temperature 180 C
3 Vulcanization Time 30 minutes
4 Shrinkage % 1

Standard Product Size

Standard Product Size Diameter wdt_ID Thickness Average Weight
Standard Product Size 300 mm 1 8 mm 1 Pair = 2 Pieces = 2 - 2.2 Kg
Standard Product Size 230 mm 2 8 mm 1 Pair = 2 Pieces = 1,2 - 1,4 Kg