Satek Brown Spin Casting Rubber 180 °C
СИЛИКОНОВАЯ РЕЗИНА ДЛЯ ЦЕНТРОБЕЖНОГО ЛИТЬЯ
Gama de moldes de muy alta resistencia térmica para zamak
SATEK Mold Rubbers
Silicone Rubber For Centrifugal Casting
Silicone Jewelry Molding Rubber
Make Complex Molds
Competitive Price
Smooth Shiny Waxes
Easy to Cut and Easy to Use
SATEK Silicone Mold Rubber
We offer quality Silicone Jewelry Molding Rubber and Silicone Spin Casting Rubber at the most competitive prices.
We can be manufactured in any scale, form and strength according to the customer’s order.
- Always Best Price and Performance
- Easy Cutting and Easy Using
- Smooth Shiny Waxes
- Make Complex Molds
- Available in a variety of diameters and thickness
- Thermal resistance for more production
- Produce highly detailed decorative
- Excellent customer service
180 °C / 90 °C Centrifugal Rubber (Silicone Rubber For Centrifugal Casting)
| wdt_ID | 180 °C / 90 °C Spin Casting Rubber | White | Yellow | Blue | Green | Brown | Red | Pink | Orange |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Hardness (Shore) | 68 - 70 | 67 - 65 | 63 - 61 | 60 - 58 | 55 - 53 | 62 - 60 | 59 - 57 | 56 - 54 |
| 2 | Vulcanization Temp | 180 / 190 °C | 180 / 190 °C | 180 / 190 °C | 180 / 190 °C | 180 / 190 °C | 80 / 90 °C | 80 / 90 °C | 80 / 90 °C |
| 3 | Vulcanization Time | 45 / 30 min | 45 / 30 min | 45 / 30 min | 45 / 30 min | 45 / 30 min | 40 / 25 min | 40 / 25 min | 40 / 25 min |
| 4 | Shrinkage | ≤0.5% | ≤0.5% | ≤0.5% | ≤1% | ≤2% | ≤1% | ≤1% | ≤2% |
The required vulcanization time prolongs with increasing thickness of the rubber layer.
The factors that affect the shrinkage rate of the rubber compound: the higher the curing temperature, the greater the shrinkage rate. In general, the temperature of each increase of 10 degrees C, the shrinkage rate increased by 0.2% ~ 0.5%
Spin Casting Rubber
Satek White Spin Casting Rubber 180 °C
Gama de moldes de muy alta resistencia térmica para zamak
СИЛИКОНОВАЯ РЕЗИНА ДЛЯ ЦЕНТРОБЕЖНОГО ЛИТЬЯ
Satek Yellow Spin Casting Rubber 180 °C
СИЛИКОНОВАЯ РЕЗИНА ДЛЯ ЦЕНТРОБЕЖНОГО ЛИТЬЯ
Gama de moldes de muy alta resistencia térmica para zamak
Satek Green Spin Casting Rubber 180 °C
СИЛИКОНОВАЯ РЕЗИНА ДЛЯ ЦЕНТРОБЕЖНОГО ЛИТЬЯ
Gama de moldes de muy alta resistencia térmica para zamak
Satek Orange Spin Casting Rubber 90 °C
Gama de moldes de muy alta resistencia térmica para zamak
СИЛИКОНОВАЯ РЕЗИНА ДЛЯ ЦЕНТРОБЕЖНОГО ЛИТЬЯ
Satek Blue Spin Casting Rubber 180 °C
Gama de moldes de muy alta resistencia térmica para zamak
СИЛИКОНОВАЯ РЕЗИНА ДЛЯ ЦЕНТРОБЕЖНОГО ЛИТЬЯ
Satek Pink Spin Casting Rubber 90 °C
Gama de moldes de muy alta resistencia térmica para zamak
СИЛИКОНОВАЯ РЕЗИНА ДЛЯ ЦЕНТРОБЕЖНОГО ЛИТЬЯ
Satek Red Spin Casting Rubber 90 °C
СИЛИКОНОВАЯ РЕЗИНА ДЛЯ ЦЕНТРОБЕЖНОГО ЛИТЬЯ
Gama de moldes de muy alta resistencia térmica para zamak
80 °C Jewelry Rubber Molds ( Low Temp Jewelry Rubbers )
| wdt_ID | 80 °C Jewelry Molding Rubber | Blue | Brown | Violet | V-5 | Ultra Yellow | Green | Yellow | Turquoise | Orange | Ultra Orange | Pink | Red |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Hardness (Shore) | 35 - 37 | 38 - 40 | 41 - 43 | 43 - 45 | 44 - 46 | 46 - 48 | 47 - 49 | 48 - 50 | 51 - 53 | 52 - 54 | 53 - 55 | 54 - 56 |
| 2 | Vulcanization Temp | 80 / 90 °C | 80 / 90 °C | 80 / 90 °C | 80 / 90 °C | 80 / 90 °C | 80 / 90 °C | 80 / 90 °C | 80 / 90 °C | 80 / 90 °C | 80 / 90 °C | 80 / 90 °C | 80 / 90 °C |
| 3 | Vulcanization Time | 25 / 15 min | 25 / 15 min | 25 / 15 min | 25 / 15 min | 25 / 15 min | 25 / 15 min | 25 / 15 min | 25 / 15 min | 25 / 15 min | 25 / 15 min | 25 / 15 min | 25 / 15 min |
| 4 | Shrinkage | ≤2% | ≤2% | ≤1% | ≤2% | ≤2% | ≤1% | ≤1% | ≤1% | ≤1% | ≤2% | ≤1% | ≤1% |
The required vulcanization time prolongs with increasing thickness of the rubber layer.
The factors that affect the shrinkage rate of the rubber compound: the higher the curing temperature, the greater the shrinkage rate. In general, the temperature of each increase of 10 degrees C, the shrinkage rate increased by 0.2% ~ 0.5%
Safe temperature: 65°C longer than 20 minutes. / Typical temperature: 90°C about 12 minutes.
Jewelry Molding Rubber
Satek Brown Jewelry Molding Rubber 80 °C
Siliconas Microfusión Marrón 80 °C
Резина силиконовая Коричневый 80 °C
Satek Blue Jewelry Molding Rubber 80 °C
Siliconas Microfusión Azul 80 °C
Резина силиконовая Синий 80 °C
Satek Orange Jewelry Molding Rubber 80 °C
Siliconas Microfusión Naranja 80 °C
Резина силиконовая Апельсин 80 °C
Satek Pink Jewelry Molding Rubber 80 °C
Siliconas Microfusión Rosa 80 °C
Резина силиконовая Розовый 80 °C
Satek Red Jewelry Molding Rubber 80 °C
Siliconas Microfusión Rojo 80 °C
Резина силиконовая Красный 80 °C
Satek Turquoise Jewelry Molding Rubber 80 °C
Siliconas Microfusión Turquesa 80 °C
Резина силиконовая Бирюзовый 80 °C
Satek Ultra Yellow Jewelry Molding Rubber 80 °C
Siliconas Microfusión Ultra Amarillo 80 °C
Резина силиконовая Ультра желтый 80 °C
Satek Yellow Jewelry Molding Rubber 80 °C
Siliconas Microfusión Amarillo 80 °C
Резина силиконовая Желтый 80 °C
Satek Green Jewelry Molding Rubber 80 °C
Siliconas Microfusión Verde 80 °C
Резина силиконовая зеленый 80 °C
180 °C Jewelry Rubber Molds ( High Temp Jewelry Rubbers )
| wdt_ID | 180 °C Jewelry Molding Rubber | Blue | Brown | Violet | V-5 | Ultra Yellow | Green | Yellow | Turquoise | Orange | Ultra Orange | Pink | Red |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Hardness (Shore) | 35 - 37 | 38 - 40 | 41 - 43 | 43 - 45 | 44 - 46 | 46 - 48 | 47 - 49 | 48 - 50 | 51 - 53 | 52 - 54 | 53 - 55 | 54 - 56 |
| 2 | Vulcanization Temp | 170 / 180 °C | 170 / 180 °C | 170 / 180 °C | 170 / 180 °C | 170 / 180 °C | 170 / 180 °C | 170 / 180 °C | 170 / 180 °C | 170 / 180 °C | 170 / 180 °C | 170 / 180 °C | 170 / 180 °C |
| 3 | Vulcanization Time | 25 / 15 min | 25 / 15 min | 25 / 15 min | 25 / 15 min | 25 / 15 min | 25 / 15 min | 25 / 15 min | 25 / 15 min | 25 / 15 min | 25 / 15 min | 25 / 15 min | 25 / 15 min |
| 4 | Shrinkage | ≤2% | ≤2% | ≤1% | ≤2% | ≤2% | ≤1% | ≤1% | ≤1% | ≤1% | ≤2% | ≤1% | ≤1% |
The required vulcanization time prolongs with increasing thickness of the rubber layer.
The factors that affect the shrinkage rate of the rubber compound: the higher the curing temperature, the greater the shrinkage rate. In general, the temperature of each increase of 10 degrees C, the shrinkage rate increased by 0.2% ~ 0.5%
Safe temperature: 135°C longer than 20 minutes. / Typical temperature: 175°C about 12 minutes.
SATEK YouTube Channel
Make professional jewelry rubber mold. Jewelry Mold Making
Spin Casting Mold Making. Silicone Rubber Molding for centrifugal casting
