Satek Special Orange Jewelry Molding Rubber
Special Orange Jewelry Rubber
Special Orange Jewelry Molding Rubber
Satek Silicone Jewelry Molding Rubber gives waxes a smooth, shiny finish that won’t stick to the mold and shiny waxes mean less finishing
Satek offer quality Jewelry Molding Rubber at the most competitive prices.
SATEK has activities to sustain its customers with silicone paste that can be manufactured in any scale, form and strength according to the costumer’s order.
The model to be embedded in Satek Jewelry Molding Rubber must be perfectly clean and dry for production of the best possible molds
Jewelry Molding Rubber gives waxes a smooth, shiny finish that won’t stick to the mold and shiny waxes mean less finishing
Why choose us ?
Special Orange Jewelry Rubber Specification
The required vulcanization time prolongs with increasing thickness of the rubber layer.
The factors that affect the shrinkage rate of the rubber compound: the higher the curing temperature, the greater the shrinkage rate. In general, the temperature of each increase of 10 degrees C, the shrinkage rate increased by 0.2% ~ 0.5%
Safe temperature: 65°C longer than 20 minutes
Typical temperature: 90°C about 12 minutes.
|2||Vulcanization Temperature||80 C|
|3||Vulcanization Time||25 minutes|
Standard Product Size
|Standard Product Size||W||L||wdt_ID||H (Thickness)||Average Weight|
|Standard Product Size||300 mm||300 mm||1||8 mm||800 - 1100 gr|
Jewelry Molding Package Size
|Package Size||W||L||H||wdt_ID||QTY||Average Gross Weight|
|Small Box Size||33 cm||33 cm||7 cm||1||6 pcs||6 - 7 Kg|
|Big Box Size||36 cm||36 cm||32 cm||2||30 pcs||26- 32 Kg|